West System Epoxy Pigment Kill Switch Pot life at 72°F (22°C):

Pot life at 72°F (22°C): 40 to 50 minutes Pot life at 95°F (35°C): 15 to 20 minutes Cure to a solid state at 72°F (22°C): 20 to 24 hours Cure to a solid state at 95°F (35°C): 6 to 8 hours Cure to maximum strength at 72°F: 4 to 9 days Minimum recommended temperature: 70°F (21°C)

If the builder intends to paddle the kayak in coastal rocky environments

this Freighter canoe kit will be the talk of the town

Sheave dia

Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode

West System Epoxy Pigment Kill Switch Pot life at 72°F (22°C):WEST SYSTEM pigments are epoxy based pastes that can be used to tint the epoxy mixture to provide a base colour for the final finish system. The coloured surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require enamel or polyurethane paint systems to provide ultraviolet protection. Add to the mixed resin hardener at a rate of approximately one teaspoon of pigment to 8fl oz of